Details

---

WEBERSET EASYBOND 99 CEMENT GUM 25KG GRADE: C1 SIRIM

Marketing description

• Ensure the substrate is dry, sound, flat/true, and free of contaminants.
• Fix ceramic tiles dry; do not soak in water.
• Mix weberset easy bond 99 with water (or latex admixture) according to the recommended ratio. Mechanical mixing is recommended.
• Spread adhesive onto the substrate at a bed thickness of 3 - 6 mm (thickness may vary depending on tile size and thickness) using a suitable notched trowel.
• Apply adhesive over no more than 1 m² at a time to prevent skin-over.
• Promptly place tiles onto the adhesive bed, twisting slightly to ensure good contact (solid bed fixing).
• Periodically touch the adhesive bed to check for skin-over. If the adhesive bed is no longer tacky/sticky, re-trowel the adhesive.
• Maintain joints approximately 2-3 mm wide between tiles.
• Remove excess adhesive from the tile surface and joints before it hardens.
• Allow to set for 24 hours before beginning grouting.
• Do not use adhesive in temperatures lower than 5°C or in damp conditions.