Details

---

NIPPON PAINT EA4 FINISH (EP) is a two-pack polyamide cured epoxy finish for use on primed steel surface where chemical, oil and abrasion resistant coating is required. It is recommended for non-immersion services. If it is to be applied over steel, it has to be used in combination with the appropriate primers as recommended below.

Product Features: • Good resistance to abrasion and mechanical damage • Excellent on correctly prepared and primed surfaces • Dry service temperature up to 100°C

 

Application Data

Application	:  Brush/Roller, Compressed Air Spray, or Airless Spray (preferably use if a thicker coat is required in one application)
Thinning	:  Thinner: SA-65 Thinner Brush/Roller: If necessary, add about 5% thinner by volume Compressed Air Spray: If necessary, add about 10-15% thinner by volume
Touch Dry/ Hard Dry	: 2 - 3 hours / 16 hours

Recoating Interval	:  Minimum 16 hours
No. of Coat(s)	:  1 - 3 coats
Theoretical Coverage	:  6.4 - 10.2 m² per liter per coat

 

Coating System

Type	Product Name	No. of Coat(s)
Primer/Sealer	Nippon Paint 8048	1 coat
Undercoat	Nippon Paint 8048	1 coat
Topcoat	Nippon Paint EA4 Finish (EP)	1 coat

Steel
Type	Product Name	No. of Coat(s)
Primer/Sealer	Nippon Paint 8048 Zinc Phosphate Primer QD	1 coat
Intermediate	Nippon Paint 8048	1 coat
Topcoat	Nippon Paint EA4 Finish (EP)	1 coat